How Do You Change A Halogen Light Bulb

Download Commodity

Changing a light seedling is supposed to be ane of the easiest tasks that exists. It'south even the field of study of jokes based on how piece of cake it is - "how many plumbers does it take to screw in a light bulb", etc. Notwithstanding, if you've always tried to change a GU10 element of group vii light bulb, y'all might understand that it isn't and then easy. It's difficult to find directions, and it isn't as self-explanatory as you might recollect. Luckily with some guidance, the process is not much more hard than changing an ordinary bulb.

i

Plow off the power switch. ^[i] You actually don't want to go electrocuted, correct? This is the first step and probably the most important in terms of safety. Make certain that you do this earlier going any further. Wait for the low-cal to cool if information technology only just burned out. If you don't feel any heat, information technology is probably safe to proceed.
2

Set up a ladder or a chair if your lite fixture is besides loftier for you to reach. You volition desire to be able to comfy movement your elbows effectually too, information technology'southward going to be much harder to change the bulb if you are standing up on your tiptoes trying to alter it using simply your finger tips. Find something that will put you at a comfortable peak and allows y'all to utilize both hands easily.

Advertisement
3

Wear gloves. ^[2] If your seedling doesn't have a protector on it, the oil from your hands can cause some serious damage to the bulb. Try to only grip it from the sides if it doesn't have a protector. If it turns out the bulb is only loose rather than burned out you don't desire to risk it exploding due to the oil on your hands once you screw it dorsum in.
four

Printing inward on the GU10 halogen seedling that is already screwed into place in your calorie-free fixture using both thumbs. Keep your grip and pressure abiding on the bulb with the thumbs equally you turn the bulb slowly counter-clockwise. Once it feels like it won't plough whatsoever further, yous can stop pushing it inward. You should rotate it about xc degrees.
5

Pull the bulb straight out of the socket. Wiggle it gently as it comes out to brand sure it comes out cleanly. Be careful non to drop information technology, peculiarly if you are on a ladder.
6

Remove the packaging from your new bulb. Remember to continue your gloves on as y'all practise this and so as non to get any oil from your easily on the new bulb, which would be even more dangerous and could crusade it to explode in the socket if it heats improperly.
7

Press the new bulb inwards into the socket. Once you lot're back up on your ladder, you'll printing the bulb in into the same position that you took the onetime bulb out from. Twist it clockwise every bit far as information technology will go, and you tin can plow the lights back on!

Advertisement

1

Plow off the power switch. Think, the electricity beingness off is of import for safety.
two
Remove the plastic coated metallic ring if at that place is one. At that place should exist two plug bits on this ring if it is a specific type of halogen bulb. Clasp them together and the band will fall out.
- Use a ladder or chair if your lite fixture is too high upwardly for you to reach. Make sure yous tin comfortably move your arms most as this task will require some dexterity.
three

Flatten a drinking harbinger and then push 1 terminate upward between the rim of the light fixture and the bulb. You lot will want to push a practiced inch and a half of the straw upward into the gap. You will then want to take the straw and move information technology around the circumference of the light bulb. Yous may need to do this a couple of times. For all-time results, treat the straw like an old fashion tin can opener by working all the way around the edge of the circle multiple times. You need to practise this because a clip holds the wires that hold the bulb into place in the top of the calorie-free fixture. ^[3] The harbinger causes the clip to release the wires which allows you to grip the bulb. Remember, this isn't the case for every single GU10 Halogen lightbulb. Nonetheless, if you are having troubles using your hands this could be a expert solution.
4

Unscrew the light bulb while wearing gloves. This is not as piece of cake as it should be. The bulb's end is a white plug shaped mechanism. Yous will need to catch the socket in one hand and the seedling in the other. Then push the bulb (gently!) into the socket and turn counter-clockwise. Use the same techniques that you would use to open a kid locked medicine bottle.
v

Throw abroad the old bulb. There isn't a visible difference between a good bulb and a burned out seedling. Don't risk disruptive the two.
6

Examine the now-empty socket. See those trivial holes in the middle? There are 4 of them. Y'all want to line the new bulb'due south plug and then that it fits into the larger holes. Then you turn it clockwise until y'all experience information technology "snap" into place. ^[four]
7

Push button the wires back up nether the metal clip (if possible). Equally y'all exercise this, piece of work the bulb back into the fixture.
8

Supercede the plastic coated band. All you lot will accept to do is push information technology back in on top of the light, but like the way information technology was before. Later that, everything should exist as skilful every bit new and you lot'll be able to use your lights over again.

Advertising

Add New Question

Question

I can't go a grip on the bulb, how can I remove it?

Utilize your thumbs to push the bulb straight into the socket. While pushing, turn the bulb counterclockwise xc°. This should release the bulb. Attaching a suction loving cup to the drinking glass cover of the bulb can brand the process much easier.
Question

How do I remove the top part of the bulb if it snapped when I attempted to accept it out?

Take a irish potato, cut it in one-half width-wise, and stick the cutting face of the potato into the broken role of the bulb. Then, just unscrew it as normal.
Question

Do I have to utilise gloves to modify the bulb?

If the bulb is protected by glass or plastic shielding, and you're replacing the entire housing, then you likely won't demand gloves. Gloves are very of import if the seedling itself is exposed, even so, since oils from your skin can significantly shorten the bulb's life. If you don't have gloves handy, a non-linen material will work in a pinch.
Question

What about the state of affairs where you tin can grip the edge of the bulb and plough it but it simply won't plow all the way back to the position where you can withdraw it. Afterwards twisting it as far every bit possible, I have tried all sorts of wriggling and pulling and concluded up snapping the head off the bulb.

Brand sure that when turning the calorie-free bulb, you hear a pocket-sized snap to ensure that the seedling is in place.
Question

I have a wall light with a halogen seedling in. It has a glass cover over it which is held in by clips which I cannot run across how to remove. There is a nut at either finish of the fitting. Practice I need to remove it?

'Nuts' are likely to be screws belongings the cover on. Undo and prepare to catch the cover!
Question

Practise I need gloves on to supplant a tiny halogen seedling in an aroma touch lamp?

I don't think so. If it is a miniature halogen bulb, and then it should be fine. Just call up to plow the lamp off before doing annihilation with the bulb.

Inquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Brand sure your light isn't hot before you touch it. If it is for any reason it might be installed incorrectly or your electricity might however be running. Address this issue first.
Effort to avoid getting oil on the inner part of the bulb. This can cause it to heat improperly and even explode.
Be careful using your ladder. Make sure it is on a solid surface and non uneven, otherwise y'all might autumn while trying to change the bulbs.
E'er become rid of the sometime element of group vii bulb so y'all don't confuse the 2.

Thank you for submitting a tip for review!

Almost This Article

Commodity Summary X

To change a Gu10 halogen lightbulb, plow off the power switch and set up a ladder under the low-cal fixture. Next, put on gloves so the oil on your hands doesn't impairment the bulb. Press against the Gu10 lightbulb with both thumbs, then push the bulb inward and turn it counter clockwise. When the bulb feels like it won't turn whatsoever more than, pull information technology out of the socket. Finally, place the new bulb in the socket and plow it clockwise as far as it volition go. To detect out how to remove a Gu10 halogen bulb with a straw, read on!

Did this summary help yous?

Thanks to all authors for creating a page that has been read 751,013 times.